PSI 20
- Lifting weight of up to 20kg
- Lowering distance 15m / 20m
- Remote controlled
- Safety locking device
- Manual key switch built in
- Pre wired terminals
PSI 20 M
- Lifting weight of up to 20kg
- Lowering distance 15m / 20m
- Remote controlled
- Safety locking device
- Manual key switch built in
- Pre wired terminals
PSI 30
- Lifting weight of up to 30kg
- Lowering distance 15m
- Remote controlled
- Safety locking device
- Manual key switch built in
- Pre wired terminals
PSI 30 M
- Lifting weight of up to 30kg
- Lowering distance 15m
- Remote controlled
- Safety locking device
- Manual key switch built in
- Pre wired terminals
PDI 35
- Lifting weight of up to 35kg
- Lowering distance 10m
- Remote controlled
- Safety locking device
- Manual key switch built in
- Pre wired terminals
PDI 35 M
- Lifting weight of up to 35kg
- Lowering distance 10m
- Remote controlled
- Safety locking device
- Manual key switch built in
- Pre wired terminals
PDI 50
- Lifting weight of up to 50kg
- Lowering distance 10m
- Remote controlled
- Safety locking device
- Manual key switch built in
- Pre wired terminals
PSI 50 M
- Lifting weight of up to 50kg
- Lowering distance 10m
- Remote controlled
- Safety locking device
- Manual key switch built in
- Pre wired terminals
Safety Locking Device
The Safety locking device provides additional security when the lift is at rest.
Special safety locking jaws engage to take the load off the suspension cables.
The jaws remain locked even in the event of a power failure and only disengage when the lift is operated.
Electrical Contact Plates
Electrical contact is made by way of spring loaded contacts plates within the main unit and fixed contacts in the lowering coupler of the lift.
Upon lowering the lift the internal relay isolates the electrical supply, once in the raised position the relay returns power to the lower contacts
Standard mounting option
NB* Secondary fixing point or tether maybe required, If in doubt please consult a structural engineer for advise
Remote control
or RCU can control up to 999 lift addresses
Each lift has its own integrated radio receiver with a unique serial address.
The RCU operates in the license-free ISM band of 433.92 MHz The range is circa 100 metres.
Lifts can be controlled individually, in pairs or in multiple groups.
Auto Stop Feature
When lowering, the lift stops automatically if the decent is interrupted or when it reaches the ground.
Adjustable Lowering Height
Each lift can be set to stop at the users desired lowering height. This can be stored in the lift for future operations.
Optional Product Accessories Examples
MBC
Bracket to securely mount the lift to the ceiling substrate with two points of fixing.
RMP
Designed to mount round ceiling rose type fixture bases or pendant mounts.
RMCP
Designed to mount square or rectangular type fittings and fixtures.
RA ME
Designed to recess the lift behind a suspended ceiling to conceal the lift from view.
AHC
Designed to cover surface mounted lifts, can also be painted to match ceiling colour.